NEWS & VIDEO

Cap Mould Engineering Topics & Project Updates

Read practical cap mould engineering notes on hot runner versus cold runner selection, in-mould closing and injection-machine compatibility. Use these guides to prepare your part drawing, output target and tooling requirements. Explore our flip top cap moulds and water and beverage cap moulds, or request a project review.

ENGINEERING NOTE

Choosing a Runner System for Cap Moulds

A hot runner can reduce or avoid runner scrap, while a cold runner changes the mould layout, part separation and material handling. Compare cavity count, cap weight, resin, injection-machine capacity, maintenance access and total production needs before choosing a system.

TRIAL FOCUS

Automatic Closing Flip-top Mould

The cap must leave the cavity without damaging the living hinge, then move through its closing sequence consistently. During a trial, check hinge stress, lid alignment, snap fit, ejection marks and the condition of parts produced over repeated cycles.

DESIGN CHECK

Mould Design for Limited Machine Tonnage

A cavity target alone cannot establish machine compatibility. Compare the mould envelope with tie-bar spacing, platen and mounting details; review shot capacity, opening stroke, ejection and clamping needs before fixing the cavity and runner arrangement.

Mould trials, products & workshop videos

Selected videos from our project archive. Each clip relates to its own tooling or product example. Select Play to load the YouTube player.

MINCONG VIDEO ARCHIVE · 2026-02-04

Flip-top mould with in-mould closing

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2022-01-10

Flip-top cap mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2022-01-09

Water cap mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2022-07-14

Multi-cavity cap mould

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2026-01-04

Sports cap mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-03-23

Engine oil cap mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-01-27

Oil cap mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2023-02-02

Measuring cup mould

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2022-06-29

Syringe mould trial & product inspection

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-04-12

Handle mould trial

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2022-01-07

PET preform mould

Archive video from Mincong Mould’s YouTube channel.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-03-31

Cosmetic product samples

Cosmetic product sample display from our archive.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-12-22

Tooling workshop archive

Archive workshop footage; published 2021-12-22.

Watch on YouTube ↗
MINCONG VIDEO ARCHIVE · 2021-08-23

Hot runner assembly

Archive footage of hot runner assembly for a measuring cap mould.

Watch on YouTube ↗
Discuss your mould project →

Latest Engineering Notes

New technical articles and documented video updates appear here when published.