Why Does Your Powder Shaker Cap Stop Dispensing?

Why Does Your Powder Shaker Cap Stop Dispensing?
Clumped powder blocking holes in a shaker cap
Concept illustration: clumped powder blocking holes in a shaker cap.

The first sample dispenses smoothly. After the bottle sits for a few days, the same cap gives you nothing on the first shake and a lump on the second. Enlarging the holes might seem like an easy fix. Before changing the mould, check whether the restriction is in the powder, the holes or the way the inner and outer caps fit together.

Run three comparisons with the same bottle and fill level

What you observeWhat to check next
Fresh powder flows through the assembled cap, but stored powder does notCheck the stored powder for lumps and compare packs held under the same storage conditions. Include the actual liner or seal in the comparison.
The same powder flows through the inner sifter alone but slows after assemblyCheck that the insert seats fully and that the outer cap does not partly cover the dispensing path.
Fresh powder dispenses unevenly through only some moulded samplesCheck for partially blocked holes, flash or differences in the clear opening. Keep cavity IDs so you can see whether the issue repeats.

Use the same shaking motion and number of shakes for each comparison. Weigh what comes out and note whether it comes out evenly or in bursts. An average dose can hide a cap that alternates between no flow and a sudden dump.

Decide whether to change the opening

If the assembled cap performs like the sifter alone and both consistently restrict fresh powder, compare a few hole patterns using the actual fill. If opening the holes solves the restriction but delivers too much per shake, try changing hole count or distribution before committing to the new geometry. If the issue appears only after storage, resolve the powder or packaging condition first and repeat the dispensing check.

Share the inner and outer cap drawings and a short video of the fresh-versus-stored comparison if you need a tooling review.