24/410 Flip-Top Cap Mould

White round flip-top caps, threaded bottle neck and steel mould
Concept rendering of 24/410 flip-top caps and tooling.

A custom 24/410 flip-top cap mould starts with the bottle you plan to run. If you already have a bottle and a cap sample, send them as a pair. If you are designing a new closure, send the bottle neck drawing and tell us what the cap needs to dispense. Mincong can use those details to review the closure fit and define the tooling scope before quoting.

Request a tooling quote: Share your bottle neck drawing, cap drawing or sample, and intended injection press.

A reliable seal for your bottle neck

Different bottle neck finishes suit different packaging applications. A 24/410 finish can be a good fit for personal care bottles that dispense lotion or gel, while other formats may suit a larger pack or a different dispensing style.

Whether your project uses 24/410 or another neck finish, Mincong designs the closure for a reliable seal on your bottle. For a flip-top cap, we check two sealing points: where the cap meets the bottle neck and where the lid closes over the dispensing opening. We use your bottle drawing or sample to design both, then agree with you on how to verify them during mould trials.

If you are replacing an existing cap, tell us which features must stay the same. For example, a wider thumb tab may be welcome, while changing the skirt diameter may affect an existing capping head. Agreeing on those limits before design keeps the quotation tied to the packaging line you actually use.

What to shareWhat it helps us check
Bottle neck drawing and a representative bottleThread engagement, where the cap seats, and which surface forms the bottle seal
Cap drawing or sample, with closed diameter and height if availableCap envelope, fit with existing handling equipment, and features the new mould must reproduce
Intended product and target dispensing openingWhether to retain the sample opening or review a different opening and matching lid seal
Resin grade, output target and press detailsMaterial assumptions, practical cavity options and machine fit
Current failures or acceptance criteriaWhich checks to include in the trial, such as closing feel, leakage or hinge damage

Quote the mould around your production line

For a multi-cavity flip-top cap mould, send the press model or machine specification sheet. We review the available space between the tie bars, platen size, mould height range and opening stroke alongside the required clamp force. A cap that fits the bottle can still require a mould that does not fit the intended machine, especially when you change cavity count.

If two quotes propose different cavity counts, ask each supplier to state the runner type, whether lid closing equipment is included, what spare parts are quoted, and what the mould trial covers. That gives you a way to compare scope before comparing price.

Agree on what makes a trial sample acceptable

During the mould trial, fit samples to the target bottle and check for leakage at both the bottle neck and the dispensing opening. Agree on the test conditions in advance, including whether the pack will be shipped on its side or used upside down. For a multi-cavity tool, specify how samples should be identified by cavity so that a fit or closing issue can be traced back to the tool.

Request a 24/410 flip-top cap mould quote

Start with the bottle neck drawing, cap sample or drawing, and press model. If you only have a working pack, send clear photos of the neck and cap, including the underside and the open lid. Photos are enough to begin the discussion; confirm critical dimensions from a drawing or physical sample before tooling approval.

Request a Tooling Quote

Related Moulds